博客主页

Upgrade Existing Faucets to 蓝牙® Communication for CF连接 Compatibility

主要形象
图像
phone app next to four touchless faucets with bluetooth connection

Are your 芝加哥水龙头 touchless faucets 蓝牙® enabled? If not, we've got great news for you. You can now easily upgrade your existing HyTronic®, HyTronic® for Patient Care, E-Tronic 80®, and E-Tronic 40® faucets to 蓝牙® communication. [MARCH 2024 UPDATE: Our EVR, ELR, and 8453 lines transitioned to the 蓝牙 “T” models, which means they're now available for CF连接!]

But why would you want to do this?

答案很简单: CF连接. With the CF连接 app, you can simplify faucet management with the touch of a finger. CF连接提供简单, intelligent water management for faucets with 蓝牙® low energy technology, allowing them to be adjusted and controlled with a smartphone or tablet. 

Follow the steps below to quickly and easily upgrade your touchless faucets to 蓝牙. Be sure to watch the video tutorials. 

How to Convert HyTronic® and HyTronic® for Patient Care to 蓝牙®

image of gooseneck touchless faucet and hand holding smartphone with CF连接 app open

首先，订购零件 # h - 001 jknf 从你的 芝加哥水龙头 Distributor. Then follow these ten easy steps:

  1. Remove the water shut-off screw.
  2. Pull the cover off the faucet body.
  3. Remove the battery or AC module.
  4. Loosen the screw on the battery holder.
  5. Pull battery holder and sensor out of the faucet and disconnect.
  6. Insert the new sensor and battery holder.
  7. Tighten the screw on the battery holder.
  8. Connect the sensor to the faucet and tuck connection into faucet body.
  9. Replace the battery or AC adapter back into the holder.
  10. Place the cover over the faucet body and secure with water shut-off screw.

观看视频教程

 

How to Convert E-Tronic® 80 to 蓝牙®

image of restroom faucets and hand holding smartphone with CF连接 app open

首先，订购零件 # e80 - 001 jknf 从你的 芝加哥水龙头 Distributor. Then follow these twelve easy steps:

  1. 拆卸喷口盖.
  2. Disconnect the sensor from the faucet.
  3. Remove the battery or AC module.
  4. Loosen the screw on the battery holder.
  5. Pull battery holder and sensor out of the faucet and discard.
  6. Position the new sensor after sliding connector under copper tube. 
  7. Insert the retaining bracket behind the sensor to hold it in place.
  8. Insert the battery holder and position over the mounting screw hole.
  9. Tighten the screw on the battery holder.
  10. Replace the battery or AC adapter back into the holder.
  11. Connect the sensor to the faucet and tuck connection into faucet body.
  12. Replace the cover over the faucet body and secure.

观看视频教程

 

How to Convert E-Tronic® 40 to 蓝牙®

image of restroom faucets and hand holding phone with CF连接 app open

首先，订购零件 # e40 - 001 jknf 从你的 芝加哥水龙头 Distributor. Then follow these eleven easy steps:

  1. 拆卸喷口盖.
  2. Remove the battery or AC module.
  3. Remove the screw on the battery holder.
  4. Remove the battery holder and sensor. 断开连接并丢弃.
  5. Position the new 蓝牙 sensor. 
  6. Insert the retaining bracket behind the sensor to hold it in place.
  7. Connect the new 蓝牙 sensor.
  8. Position the battery holder and push wires into faucet cavity. 
  9. Tighten the screw on the battery holder.
  10. Install the battery or AC adapter.
  11. Replace the cover over the faucet body and secure.

观看视频教程

 

学习 more about the CF连接 App

与专家会面